Ubiquiti Networks M6 Specifikace

5 GHz High-Performance Integrated InnerFeed AntennaModel: AGM5-HP-1114

8airGrid™ AGM5-HP-1114 Quick Start Guide5. Click the Wireless tab. From the Antenna drop-down, select the size of Grid Reflector you are using. Click

9SpecificationsSpecificationsAGM5-HP-1114Dimensions 370 x 270 x 264 mm (Mount Included)Weight 1.440 kg (Mount Included)Networking Interface (1) 10/100

10airGrid™ AGM5-HP-1114 Quick Start GuideElectrical Safety Information1. Compliance is required with respect to voltage, frequency, and current requi

11ComplianceNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWO

12airGrid™ AGM5-HP-1114 Quick Start GuideNOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursua

13ComplianceRF Exposure WarningThe antennas used for this transmitter must be installed to provide a separation distance of at least 2.52 m from all p

14airGrid™ AGM5-HP-1114 Quick Start GuideDeutschDie Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/od

15Declaration of ConformityItalianoLa direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o

16airGrid™ AGM5-HP-1114 Quick Start GuideJL080112Ελληνική [Greek]ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ UBIQUITI NETWORKS ΔΗΛΩΝΕΙ ΟΤΙ UBIQUITI NETWORKS device, ΣΥΜΜΟΡΦΩΝΕΤΑΙ

Ubiquiti Networks SupportEmail: [email protected] (9 a.m. - 5 p.m. PST): 408-942-1153Online ResourcesWiki Page: wik i.ubnt.comSupport Forum: f

1IntroductionIntroductionThank you for purchasing the Ubiquiti Networks airGrid™ 5GHz High-Performance Integrated InnerFeed Antenna, model AGM5-HP-11

2airGrid™ AGM5-HP-1114 Quick Start GuideInstallation Requirements• 10 mm wrench• Shielded Category 5 (or above) cabling should be used for all wired

3Hardware Installation2. Route an Ethernet cable through the cable opening of the Feed Support and connect it to the Ethernet port on the back of the

4airGrid™ AGM5-HP-1114 Quick Start Guide3. Insert the Antenna Feed into the Feed Support until it locks intoplace.Horizontal Polarization Vertical P

5Hardware Installation5. Attach the airGrid to the pole.Note: The mounting assembly can accommodate a Ø 1.25" - 2.2" pole.a. Ensure that t

6airGrid™ AGM5-HP-1114 Quick Start GuideConnecting Power over Ethernet1. Connect the other end of the Ethernet cable from the airGrid to the Ethernet

7Accessing airOSAccessing airOSVerify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Etherne